Query Interval:
Enter the time interval of sending a general query frame by IGMP
Snooping Querier.
Max Response
Time:
Enter the maximal time for the host to respond to a general
query frame sent by IGMP Snooping Querier.
General Query
Source IP:
Enter the source IP of the general query frame sent by IGMP
Snooping Querier. It should not be a multicast IP or a broadcast
IP.
IGMP Snooping Querier Table
Select the desired entry. It is multi-optional.
VLAN ID: Displays t
he ID of the VLAN that enables IGMP Snooping
Querier.
Displays the Query Interval of the IGMP Snooping Querier.
Max Response
Time:
Displays the maximal time for the host to respond to a general
query frame sent by IGMP Snooping Querier.
General Query
Source IP:
Displays the source IP of the general query frame sent by IGMP
Snooping Querier.
8.1.6 Profile Config
On this page you can configure an IGMP profile.
Choose the menu Multicast→IGMP Snooping→Profile Config to load the following page.
Figure 8-9 Profile Config
The following entries are displayed on this screen:
Profile Creation
104
To Next Page
Loading...
