TP-Link JetStream T1500G-10MPS - Port Configuration

Click the Detail button to view the information of the corresponding VLAN.
Figure 6-5 View the Current VLAN of Port
The following entries are displayed on this screen:

VLAN of Port
VLAN ID：
Displays the ID number of VLAN.
Name:
Displays the user-defined description of VLAN.
Operation:
Allows you to remove the port from the current VLAN.
Configuration Procedure:
Step
Operation
Description
1 Set the link type for
port.
Required. On the VLAN→802.1Q VLAN→Port Config page, set
the link type for the port basing on its connected device.
2 Create VLAN. Required. On the VLAN→802.1Q VLAN→VLAN Config page,
click the Create button to create a VLAN. Enter the VLAN ID
and the description for the VLAN. Meanwhile, specify its
member ports.
3 Modify/View VLAN. Optional. On the VLAN→802.1Q VLAN→VLAN Config page,
click the Edit/Detail button to modify/view the information of
the corresponding VLAN.
4 Delete VLAN Optional. On the VLAN→802.1Q VLAN→VLAN Config page,
select the desired entry to delete the corresponding VLAN by
clicking the Delete button.
6.2 Application Example for 802.1Q VLAN
 Network Requirements
 Switch A is connecting to PC A and Server B;
 Switch B is connecting to PC B and Server A;
 PC A and Server A is in the same VLAN;
 PC B and Server B is in the same VLAN;
 PCs in the two VLANs cannot communicate with each other.
68