TP-Link JetStream T1500G-10MPS - Page 79

 Network Diagram
 Configuration Procedure
 Configure switch A
Step
Operation
Description
1 Create VLAN10 Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 10, owning Untagged Port 2 and Tagged
Port 3.
2 Create VLAN20 Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 20, owning Tagged Port 3 and Untagged
Port 4.
 Configure switch B
Step
Operation
Description
1 Create VLAN10 Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 10, owning Tagged Port 6 and Untagged
Port 8.
2 Create VLAN20 Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLAN ID as 20, owning Tagged Port 6 and Untagged
Port 7.
Return to CONTENTS
69