Chapter 11 ACL
11.1 ACL Config
An ACL may contain a number of rules, and each rule specifies a different package range.
Packets are matched in match order. Once a rule is matched, the switch processes the
matched packets taking the operation specified in the rule without considering the other rules,
which can enhance the performance of the switch.
The ACL Config function can be implemented on ACL Summary, ACL Create, MAC ACL,
Standard-IP ACL and Extend-IP ACL pages.
11.1.1 ACL Summary
On this page, you can view the current ACLs configured in the switch.
Choose the menu ACL→ACL Config→ACL Summary to load the following page.
Figure 11-1 ACL Summary
The following entries are displayed on this screen:
Search Option
Select the ACL you have created
Displays the type of the ACL you select.
Displays the rule order of the ACL you select.
Rule Table
Display the rule table of the ACL you have selected. Here you can edit the rules, view the details
of them, and move them up and down.
11.1.2 ACL Create
On this page you can create ACLs.
135
To Next Page
Loading...
