TP-Link JetStream T1500G-10MPS - Multicast Table

Figure 8-11 Packet Statistics
The following entries are displayed on this screen:

Auto Refresh
Auto Refresh:
Select Enable/Disable auto refresh feature.
Refresh Period:
Enter the time from 3 to 300 in seconds to specify the auto
refresh period.

IGMP Statistics
Port:
Displays the port number of the switch.
Query Packet:
Displays the number of query packets the port received.
Report Packet (V1):
Displays the number of IGMPv1 report packets the port
received.
Report Packet (V2):
Displays the number of IGMPv2 report packets the port
received.
Report Packet (V3): Displays the number of IGMPv3 report packe
ts the port
received.
Leave Packet:
Displays the number of leave packets the port received.
Error Packet:
Displays the number of error packets the port received.
8.2 Multicast Table
In a network, receivers can join different multicast groups appropriate to their needs. The
switch forwards multicast streams based on IPv4/IPv6 multicast address table.
108