TP-Link JetStream T1500G-10MPS - Authentication Server Group Config

Choose the menu Network Security→AAA→TACACS+ Conifg to load the following page.
Figure 12-27 TACACS+ Server Config

Configuration Procedure
Configure the TACACS+ server’s IP and other relevant parameters under the Server Config.
View, edit and delete the configured TACACS+ servers in the Server list.

Entry Description
Server IP:
Enter the IP of the server running the TACACS+ secure protocol.
Shared Key:
Enter the shared key between the TACACS+ server and the
switch. The TACACS+ server and the switch use the key string to
encrypt passwords and exchange responses.
Timeout:
Specify the time interval that the switch waits for the server to
reply before resending.
Port:
Specify the TCP port used on the TACACS+ server for AAA.
12.6.5 Authentication Server Group Config
On this page users can group authentication servers running the same secure protocol for
authentication. The switch has two built-in authentication server group, one for RADIUS and the
other for TACACS+. These two server groups cannot be edited or deleted. The server entries in
one group are tried in the order they are added.
The server entries in one group are tried in the order they are added.
179