TP-Link JetStream T1500G-10MPS - Page 190

Choose the menu Network Security→AAA→Server Group to load the following page.
Figure 12-28 Create New Server Group
Figure 12-29 Add Server to Server Group

Configuration Procedure
1) Configure the Server Group name and Server Type to create a server group.
2) Click edit in the Server Group List to configure the corresponding server group.
3) Select Server IP you have previously created and click add to add the server to the server
group. (Figure 12-29)
View and delete the configured server groups in the Server Group list.
View and delete the configured servers in the server IP list.

Entry Description
Server Group:
Define a server group with a group name.
Server Type:
Specify the server type as RADIUS or TACACS+.
Server IP
Select the IP of the server you have previously configured.
Note:
1. The two built-in server groups radius and tacacs+ cannot be deleted or edited.
2. Up to 16 servers can be added to one server group.
180