Mirror Session List
Displays the mirror session number.
Displays the mirroring port.
Mode: Displays the mirror mode.
The value will be "Ingress Only",
"Egress Only" or “Both”.
Displays the mirrored ports.
Operation: You can configure the mirror session by clicking Edit
, or clear
the mirror session configuration by clicking the Clear.
Click Edit to display the following figure.
Figure 5-3 Port Mirror Config
The following entries are displayed on this screen:
Destination Port
Destination Port:
Input or select a physical port from the port panel as the
mirroring port.
42
To Next Page
Loading...
