11
1.4 Do the Basic Configurations
After Logging in to EAP, follow the step-by-step instructions to complete the basic
configurations.
1. In the pop-up window, configure a new username and a new password for your user
account, then click Next.
2. For the dual-band EAP, select at least one radio band between 2.4GHz and 5GHz to
configure the SSID and password. For the single-band EAP, configure the SSID and
password on the 2.4GHz band. Click Save. You can also skip this step and configure
wireless settings later on the management page.
To Next Page
Loading...
