TP-Link Omada EAP620 - Detect Rogue Aps and Move the Rogue Aps to the Trusted AP List

48
Note:
The Rogue AP Detection feature is only used for collecting information of the nearby wireless
network and does not impact the detected APs, no matter what operations you have executed in
this feature.
To configure Rogue AP Detection, go to the Wireless > Rogue AP Detection page.
Detect Rogue APs and Move the Rogue APs to the Trusted AP List
Follow the steps below to detect the nearby APs and move the trusted ones to the Trusted
AP list.
1. In the Settings section, check the box to enable Rogue AP Detection. Click Save.