TP-Link T1700G-28TQ - 8.2 Spanning Tree Port Configuration

92
Step Operation Description
2
Create Protocol Template. Required. On the VLAN→Protocol VLAN→Protocol
Template
page, create the Protocol Template before
configuring Protocol VLAN.
3
Create Protocol VLAN. Required. On the VLAN→Protocol VLAN→Protocol
Group
page, select the protocol name and enter the VLAN
ID to create a Protocol VLAN. Meanwhile, enable protocol
VLAN for ports.
4
Modify/View VLAN. Optional. On the VLAN→Protocol VLAN→Protocol
Group Table page, click the Edit button to modify/view the
information of the corresponding VLAN.
5
Delete VLAN. Optional. On the VLAN→Protocol VLAN→Protocol
Group Table
page, select the desired entry to delete the
corresponding VLAN by clicking the Delete button.
7.6 Application Example for Protocol VLAN
 Network Requirements
 Department A is connected to the company LAN via Port12 of switch A;
 Department A has IP host and AppleTalk host;
 IP host, in VLAN10, is served by IP server while AppleTalk host is served by AppleTalk server;
 Switch B is connected to IP server and AppleTalk server.
 Network Diagram