TP-Link T1700G-28TQ - Chapter 2 Introduction; Overview of the Switch; Appearance Description; Front Panel

6
Chapter 2 Introduction
Thanks for choosing the T1700G-28TQ JetStream 24-Port Gigabit Stackable Smart Switch with 4
10GE SFP+ Slots!
2.1 Overview of the Switch
Designed for workgroups and departments, JetStream Gigabit Smart Switch from TP-LINK
provides wire-speed performance and full set of L2 and L2+ management features. It provides a
variety of service features and multiple powerful functions with high security.
The EIA-standardized framework and smart configuration capacity can provide flexible solutions
for a variable scale of networks. QoS and IGMP/MLD snooping/filtering optimize voice and video
application. Link aggregation (LACP) increase aggregated bandwidth, optimizing the transport of
business critical data. SNMP/SNMPv6, RMON, WEB/CLI/Telnet Log-in bring abundant
management policies.
TP-LINK JetStream 24-Port Gigabit Stackable Smart Switch with 4 10GE
SFP+ Slots integrates multiple functions with excellent performance, and is friendly to manage,
which can fully meet the need of the users demanding higher networking performance.
T1700G-28TQ also supports stacking of up to 6 units, thus providing flexible scalability and
protective redundancy for your networks.
2.2 Appearance Description
2.2.1 Front Panel
The front panel of T1700G-28TQ is shown as Figure 2-1.
Figure 2-1 Front Panel of T1700G-28TQ
The following parts are located on the front panel of T1700G-28TQ:
 LEDs
Name Status Indication
PWR
On The switch is powered on
Flashing Power supply is abnormal
Off The switch is powered off
SYS
Flashing
The switch is working normally
On/Off The switch is working abnormally
Master
On
The switch works as master in the stack system, or
does not join any stack system
Off
The switch works as stack member in the stack system