TP-Link T1700G-28TQ - Bandwidth Control; Rate Limit

167
11.2 Bandwidth Control
Bandwidth function, allowing you to control the traffic rate and broadcast flow on each port to
ensure network in working order, can be implemented on Rate Limit and Storm Control pages.
11.2.1 Rate Limit
Rate limit functions to control the ingress/egress traffic rate on each port via configuring the
available bandwidth of each port. In this way, the network bandwidth can be reasonably distributed
and utilized.
Choose the menu QoS→Bandwidth Control→Rate Limit to load the following page.
Figure 11-10 Rate Limit
The following entries are displayed on this screen:
 Rate Limit Config
UNIT/LAGS: Click unit number to configure the physical ports
of this unit
member. Click LAGS to configure the link aggregation groups.
Select:
Select the desired port for Rate configuration. It is
multi-optional.
Port: Displays the port number of the switch.
Ingress Rate
(1-1000000Kbps):
Configure the band
width for receiving packets on the port. You
can select a rate from the dropdown list or manually
set Ingress
rate, the system will automatically select integral multiple of
64Kbps that closest to the rate you entered as the real Ingress
rate.