Displays the MAC address of the member switch.
Priority:
Displays the member priority of the member switch. The higher the
value is, the more likely the member will be elected as the master.
Version: Displays the current firmware version of the member switch.
Device Type: Displays the device type of the switch.
State: Displays the state of the switch.
Stack Port Info
UN IT: Displays the stack ports’ information of the selected unit.
Stack Port: Displays the stack port number.
Stack Port Group: Displays the group that the stack port belongs to.
Status
Displays the stack port status.
Neighbor:
Displays the MAC address of the switch which is directly
connecting to the stack port.
5.1.2 Stack Config
On this page you can configure the basic parameters of the stack function.
To Next Page
Loading...
