TP-Link T1700G-28TQ - Port Isolation

60
aging time and can only be deleted manually. The learned
entries will be saved even the switch is rebooted.
Status
: Select Enable/Disable the Port Security feature for the port.
Note:
The Port Security function is disabled for the LAG port member. Only the port is removed from the
LAG, will the Port Security function be available for the port.
6.1.4 Port Isolation
Port Isolation provides a method of restricting traffic flow to improve the network security by
forbidding the port to forward packets to the ports that are not on its forward portlist.
Choose the menu Switching→Port→Port Isolation to load the following page.
Figure 6-5 Port Isolation
The following entries are displayed on this screen:

Port Isolation List
UNIT/LAGS:
Click unit number to display the information of the physical ports
associated with this unit member. Click LAGS
to display the
information of the link aggregation groups.
Port: Displays the port number.
LAG : Displays the LAG number which the port belongs to.
Forward Portlist: Displays the forward portlist.