TP-Link T1700G-28TQ - Profile Config

143
9.2.6 Profile Config
On this page you can configure an MLD profile.
Choose the menu Multicast→MLD Snooping→Profile Config to load the following page.
Figure 9-18 Profile Config
The following entries are displayed on this screen:

Profile Creation
Profile ID: Specify the Profile ID you want to create, and it should
range from 1 to 999.
Mode: The attributes of the profile.
 Permit
: Only permit the IP address within the IP
range and deny others.
 Deny:
Only deny the IP address within the IP
range and permit others.

Search Option
Search Option: Select the rules for displaying profile entries.
 All: Display all profile entries.
 Profile ID: Display profile entry of the ID.

MLD Profile Info
Select: Select the profile entries you want to config.
Profile ID: Displays the profile ID.
Mode: Displays the attribute of the profile.
 Permit:
Only permit the IP address within the IP
range and deny others.
 Deny:
Only deny the IP address within the IP
range and permit others.
Bind Ports: Displays the ports that the profile bound to.