Chapter 13 Network Security
This module is used to configure the protection measures for the
network security. Here mainly introduces:
• IP-MAC Binding: B
ind the IP address, MAC address, VLAN
ID and the connected Port number of the Host together.
•
DHCP Snooping: Monitor the process of the host and record
ARP Inspection: Configure ARP inspection feature to prevent
the network from ARP attacks.
•
DoS Defend: Configure DoS defend feature to prevent DoS
802.1X: Configure common access control mechanism for
LAN ports to solve mainly authentication and security
problems.
Chapter 14 SNMP This module is used to c
onfigure SNMP function to provide a
management frame to monitor and maintain the network
devices. Here mainly introduces:
• SNMP Config: Configure global settings of SNMP function.
•
Notification: Configure notification function for the
management station to monitor and process the events.
•
RMON: Configure RMON function to monitor network more
efficiently.
Chapter 15 Maintenance This module is used to assemble the commonly used system
tools to manage the switch. Here mainly introduces:
• System Monitor: Monitor the memory and CPU of the switch.
• Log: View configuration parameters on the switch.
•
Device Diagnostics: Test the connection status of the cable
connected to the switch, test if the port of the switch and the
connected device are available.
•
Network Diagnostics: Test if the destination is reachable and
the account of router hops from the switch to the destination.
Appendix A Specifications Lists the hardware specifications of the switch.
Appendix B Glossary Lists the glossary used in this manual.
Return to CONTENTS
To Next Page
Loading...
