This module is used to configure system properties of the
switch. Here mainly introduces:
• System Info: Configure the de
scription, system time and
network parameters of the switch.
• User Management
: Configure the user name and password
for users to log on to the Web management page with a
certain access level.
• System Tools: Manage the firmware and configuration files of
the switch.
• Access Security:
Provide different security measures for the
login to enhance the configuration management security.
• SDM Template: Configure and view the SDM templates.
Chapter 5 Stack This module is used to configure t
he stack properties of the
switch. Here mainly introduces:
• Stack Info: View the detailed information of the stack.
• Stack Config: Configure the current stack.
Chapter 6 Switching This module is used to configure basic functions of the switch.
Here mainly introduces:
• Port: Configure the basic features for the port.
•
LAG: Configure Link Aggregation Group. LAG is to combine a
number of ports together to make a single high-bandwidth
data path.
• Traffic Monitor: Monitor the traffic of each port.
• MAC Address: Configure the address table of the switch.
Chapter 7 VLAN
This module is used to configure VLANs to control broadcast in
LANs. Here mainly introduces:
• 802.1Q VLAN: Configure 802.1Q VLAN.
• MAC VLAN: Configure MAC-
based VLAN without changing
the 802.1Q VLAN configuration.
•
Protocol VLAN: Create VLANs in application layer to make
some special data transmitted in the specified VLAN.
Chapter 8 Spanning Tree This module is used
to configure spanning tree function of the
switch. Here mainly introduces:
•
STP Config: Configure and view the global settings of
spanning tree function.
• Port Config: Configure CIST parameters of ports.
• MSTP Instance: Configure MSTP instances.
• STP Security:
Configure protection function to prevent
devices from any malicious attack against STP features.
To Next Page
Loading...
