TP-Link T1700G-28TQ - Page 132

122
The following entries are displayed on this screen:

Global Config
IGMP Snooping: Select Enable/Disable IGMP snooping function globally on the
switch.
Unknown Multicast:
Select the operation for the switch to process unknown multicast,
Forward or Discard.
Report Message
Suppression:
Enable or disable Report Message Suppression function globally.
If this function is enabled, the first Report Me
ssage from the
listener will be forwarded
to the router ports while the subsequent
Report Message will be suppressed to reduce the IGMP packets.
Router Port Time:
Specify the aging time of the router port. Within this time, if the
switch does not receive
IGMP query message from the router port,
it will consider this port is not a router port any more.
Member Port Time:
Specify the aging time of the member port. Within this time, if the
switch does not receive IGMP report message from the member
port, it will consider this port is not a member port any more.
Last Listener Query
Interval:
Enter the interval between the switch sends out MASQs.
Last Listener Query
Count:
Enter the number of MASQs that the switch sends before aging
out a multicast address when there is no IGMP report response.

IGMP Snooping Status
Description: Displays IGMP snooping status.
Member: Displays the member of the corresponding status.