153
Subnet Mask: Specify the subnet mask of the interface's IP address.
Admin Status: Specify interface administrator status. Choose Disable to disable
the interface's Layer 3 capabilities.
Interface Name: Specify the name of the network interface.
Interface List
Select : Select the interfaces to modify or delete.
ID: Displays the ID of the interface.
Mode: Display IP address allocation mode.
None: without ip.
Static: setup manually.
DHCP: allocated through DHCP.
BOOTP: allocated through BOOTP.
IP Address: Displays the IP address of the interface.
Subnet Mask: Displays the subnet mask of the interface.
Interface Name: Displays the name of the interface.
Status:
Displays interface current working status. Working status is up
when admin status is enabled
, line protocol is up and IP Address
is set.
Operation: You can configure the interface by clicking the Edit
Detail information by clicking Detail.
Click Edit to display the following figure:
To Next Page
Loading...
