TP-Link T1700G-28TQ - Page 22

12

Port Status
The port status diagram shows the working status of the ports on the specified unit switch.
Indicates the 1000Mbps port is not connected to a device.
Indicates the 1000Mbps port is at the speed of 1000Mbps.
Indicates the 1000Mbps port is at the speed of 10Mbps or 100Mbps.
Indicates the SFP+ port is not connected to a device.
Indicates the SFP+ port is at the speed of 1000Mbps.
Indicates the SFP+ port is at the speed of 10Gbps.
When the cursor moves on the port, the detailed information of the port will be displayed.
Figure 4-2 Port Information

Port Info
Port: Displays the port number of the switch.
Type:
Displays the type of the port.
Speed:
Displays the maximum transmission rate of the port.
Status:
Displays the connection status of the port.