TP-Link T1700G-28TQ - Page 80

70
Choose the menu Switching→Traffic Monitor→Traffic Statistics to load the following page.
Figure 6-13 Traffic Statistics
The following entries are displayed on this screen:

Auto Refresh
Auto Refresh
:
Allows you to Enable/Disable refreshing the Traffic Summary
automatically.
Refresh Rate
: Enter a value in seconds to specify the refresh interval.

Port Select
UNIT
/LAGS:
Click unit number to display the information of the physical ports
associated with this unit member. Click LAGS
to display the
information of the link aggregation groups.
Port:
Enter a port number and click the Select button or select
the port
to view the traffic statistics of the corresponding port.

Statistics
Received
: Displays the details of the packets received on the port.
Sent
: Displays the details of the packets transmitted on the port.
Broadcast
: Displays the number of good broadcast packet
s received or
transmitted on the port. The error frames are not counted in.
Multicast
:
Displays the number of good multicast packets received or
transmitted on the port. The error frames are not counted in.
Unicast
: Displays the number of good unicast pa
ckets received or
transmitted on the port. The error frames are not counted in.