TP-Link TD-8811 User Manual

TD-8811 ADSL2+ Modem Router User Guide
51
4.3.4.1 MAC Filtering
Choose “Securit
y→MAC Filtering” menu, you can configure the MAC filtering rule in the next
screen similar to Figure 4-26. The MAC Address Filtering fe
ature allows you to control the
access of users on your local network basing on their MAC addresses.
Figure 4-26
MAC Filtering Global Policy - The default setting is FORWARDED.
• FORWARDED means that all MAC layer frames will be forwarded except those matching
with any of the specified rules in the following table.
• BLOCKED means that all MAC layer frames will be blocked except those matching with
any of the specified rules in the following table.
You can change the policy by clicking the Change Policy button to go to the Change MAC
Filtering Global Policy page as shown in Figure 4-27.
Figure 4-27
To add a new entry, follow the steps below.
1. Click the Add button in Figure 4-26 to go to the A
dd MAC Filter page as shown in Figure
4-28.

TP-Link TD-8811 Specifications

General

Connectivity LEDs	Yes
Dimensions (WxDxH)	165 x 108 x 28 mm
Connectivity technology	Wired
Maximum data transfer rate	0.1 Gbit/s
Supported data transfer rates	10/100 Mbps
Networking standards	IEEE 802.1d
Ethernet LAN data rates	10, 100 Mbit/s
Routing protocols	IP
Supported network protocols	PPPoE, RFC 2364
DSL specification	ANSI T1.413 Issue 2, ITU-T G.992.1, ITU-T G.992.2, ITU-T G.994.1, ITU-T G.992.3, ITU-T G.992.5
Ethernet LAN (RJ-45) ports	1
Firewall security	Network address translation (NAT) firewall, Stateful packet inspection (SPI) firewall
Security algorithms	802.1x RADIUS
Filtering description	Domain
Product color	Black, White
Storage temperature (T-T)	-40 - 70 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 90 %
Operating relative humidity (H-H)	10 - 90 %
Power consumption (typical)	4.1 W

Weight and Dimensions

Weight	300 g