Configuring Spanning Tree Configuration Example for MSTP
User Guide 345
Figure 5-10 Configuring the Region
4) Choose the menu L2 FEATURES > Spanning Tree > MSTP Instance > Instance
Config. Map VLAN101-VLAN103 to instance 1 and set the Priority as 0; map VLAN104-
VLAN106 to instance 2 and set the priority as 32768. Click Create.
Figure 5-11 Configuring the VLAN-Instance Mapping
5) Choose the menu L2 FEATURES > Spanning Tree > MSTP Instance > Instance Port
Config to load the following page. Set the path cost of port 1/0/2 in instance 2 as
300000 so that port 1/0/1 of switch A can be selected as the designated port.
Figure 5-12 Configure the Path Cost of Port 1/0/2 in Instance 2
6) Click to save the settings.
To Next Page
Loading...
