Configuring DHCP Service Configuration Examples
User Guide 467
Subnet Mask, Lease Time, Default Gateway and DNS Server as shown below. Click
Create.
Figure 5-3 Configuring DHCP Server Pool
3) Choose the menu L3 FEATURES > DHCP Service > DHCP Server > Manual Binding
and click to load the following page. Select the DHCP server pool you just
created, and enter the IP address of the FTP server in the IP Address field. Select
Hardware Address as the binding mode, and enter the MAC address of the FTP server
in the Hardware Address field. Select Ethernet as the Hardware Type. Click Create.
Figure 5-4 Configuring Manual Binding
4) Click to save the settings.
To Next Page
Loading...
