User Guide 474
Configuring DHCP Service Configuration Examples
■ Configuring the VLAN Interface and Routed Port on the Relay Agent
1) Choose the menu L3 FEATURES > Interface and click to load the following
page. Create VLAN interface 10 and VLAN interface 20. Configure port 1/0/5 as the
routed port.
Figure 5-13 Creating VLAN Interface 10
Figure 5-14 Creating VLAN Interface 20
2) On the same page, click again to configure port 1/0/5 as the routed port.
To Next Page
Loading...
