User Guide 664
Configuring Port Security Port Security Configuration
Switch#configure
Switch(config)#interface gigabitEthernet 1/0/1
Switch(config-if)#mac address-table max-mac-count max-number 30 exceed-max-
learned enable mode permanent status drop
Switch(config-if)#show mac address-table max-mac-count interface gigabitEthernet
1/0/1
Port Max-learn Current-learn Exceed Max Limit Mode Status
---- --------- ----------- ---------- ------ --------
Gi1/0/1 30 0 disable permanent drop
Switch(config-if)#end
Switch#copy running-config startup-config
To Next Page
Loading...
