EasyManua.ls Logo

TR Equipment TR 2000 - TR 3000; 9650 (-2006) - Adjust the Drivebelt Tension Mechanism

TR Equipment TR 2000
76 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Hygiene Equipment
Designed for People
Hygiene Equipment
Designed for People
Hygiene Equipment
Designed for People
TR 2000/3000/9650
Shower trolleys and Mobile Bath Lift System
Hygiene Equipment
Designed for People
57
Grease the mechanism some.
Push a 12.5 mm (1/2”) square bar into the stainless steel
pipe to simulate a tensioned drivebelt, pic A.
The washer in the mechanism shall activate the limit switch
pic B, without hurting the switch house or its bracket.
If an empty chair does not lower properly when pressing the
down pad, carefully bend the metal wing on the limit switch
pic C as the switch shall still be activated in pic D to lower the
light weight chair. If necessary, adjust the washer by removing
the bar and loosening the 10 mm nuts pic E. The washer shall
leave the limit switch completely when the drivebelt slacken
pic F. The lift/trolley shall stand up for the nal testing.
TR 3000/TR 9650 - Adjust the drivebelt tension mechanism
A
B
C
D
E
F
G

Table of Contents

Related product manuals