18
Data Setting Mode
Data Setting Mode is very important for Vector to operate correctly.
Available Settings:
•
•
•
•
•
After a setting is confirmed, Vector will move on to the next setting in
order. If no button is pressed for 15 seconds, Vector will return to
Normal Mode.
Overview:
TO ENTER DATA SETTING MODE, HOLD DOWN ALL THREE
BUTTONS FOR 3 SECONDS
All digits will light up.
Release buttons to
continue.
Enter Data Setting Mode:
Kilometers or Miles per Hour
Wheel Size in Millimeters
24 hour or 12 hour Clock Format
Time of Day
Temperature Unit of Measure, °F or °C
To Next Page
Loading...
Need help?
General