Trail Tech Vector - Data Setting Mode: Part 3; Setting Clock Format and Time

20
Program 12 or 24 Hour Clock Format:
Vector defaults to 12H format.
TO CYCLE BETWEEN
12H AND 24H, PRESS
THE LEFT BUTTON.
TO CONFIRM, PRESS THE CENTER BUTTON.
Vector will go to the next setting.
MODIFY FLASHING DIGIT BY
PRESSING THE LEFT BUTTON.
CHANGE TO NEXT DIGIT BY
PRESSING THE RIGHT BUTTON.
TO CONFIRM, PRESS THE CENTER BUTTON.
Vector will go on to the next setting.
Program Time of Day:
Data Setting Mode