Lap Timer Mode
35
Pace Lights:
Vector keeps track of how fast each lap has been run. At the beginning
of Lap 3, the red and amber LED’s will begin working.
•
•
•
Notes:
•
•
Amber means faster than the last lap.
Red means slower than the last lap.
A blinking LED means the last lap was the record: either the fastest
or slowest lap yet. Amber for fastest or red for slowest.
LED comparison information is accurate to the second. When the
rider completes two identical laps (down to the second,) neither
LED will light up.
The LED’s will not function unless Vector is installed into a 12 volt
electrical system.
RED LEDAMBER LED
To Next Page
Loading...
Need help?
General