Set the number of kilometers or miles left until Vector displays the oil
and wrench shaped reminder icons. After setting <OIL>, the <CARE>
setting screen will appear. Vector defaults to 0 KM/H or M/H.
MODIFY FLASHING DIGIT
BY PRESSING THE LEFT
BUTTON.
CHANGE TO NEXT DIGIT
BY PRESSING THE RIGHT
BUTTON.
TO CONFIRM, PRESS THE
CENTER BUTTON.
Vector will return to normal
mode after setting <CARE>.
•
•
•
•
Things that will not affect the maintenance reminders:
•
•
•
•
23
Data Setting Mode
Set Oil and Maintenance Reminders:
Each km/mile the bike travels lowers the maintenance reminder
values by 1.
When a maintenance reminder countdown reaches 0 while riding,
the respective icon ( or ) will activate (turn on).
Vector will not increase the value of the maintenance reminders
automatically; they must be manually increased in data setting
mode.
When maintenance reminder setting screens are viewed in data
setting mode, the icons will turn off if they have been activated.
Entering data setting mode
Using the adjustable trip distance feature
Resetting single-ride data
A system reset
To Next Page
Loading...
Need help?
General