When the engine temperature sensor reaches the value of this setting,
the red right LED will turn on as a critical warning. Setting to 0 disables
the alert. Vector defaults to 0°.
MODIFY FLASHING DIGIT BY
PRESSING THE LEFT BUTTON.
CHANGE TO NEXT DIGIT BY
PRESSING THE RIGHT BUTTON.
TO CONFIRM, PRESS THE CENTER BUTTON.
Vector will go on to the next setting.
Data Setting Mode
22
Program High Temp Warning Point:
When the engine temperature sensor reaches the value of this setting,
the amber left LED will turn on as a cautionary warning. Setting to 0
disables the alert. Vector defaults to 0°.
MODIFY FLASHING DIGIT BY
PRESSING THE LEFT BUTTON.
CHANGE TO NEXT DIGIT BY
PRESSING THE RIGHT BUTTON.
TO CONFIRM, PRESS THE CENTER BUTTON.
Vector will go on to the next setting.
Program Danger Temp Warning Point:
To Next Page
Loading...
Need help?
General