5
Precautions
When using Vector, follow basic
precautions, including the
following:
• Read all instructions before
using Vector.
• When installing radiator hose
insert temperature sensors,
make sure the sensor will fit
BEFORE cutting the radiator
hose.
• Use Vector only for its intended
function.
• To reduce the risk of injury, do
not disassemble Vector or its
accessories.
• Vector can be used in the rain
but should not be used
underwater.
• Do not leave the main unit in
direct sunlight when not riding.
• Check relative positions and
gap between speed sensor and
magnet periodically.
• Do not bend, twist, kink or
otherwise abuse the sensor
cables. A damaged cable may
produce incorrect readings.
• When installing Vector, turn
the vehicle ignition off: the wires
carry power from the vehicles
ignition system.
• Avoid contact with gasoline,
degreasers or other chemical
cleaners as they may damage
Vector.
WARNING:
REMEMBER TO PAY ATTENTION
TO THE TRAIL WHILE RIDING.
To Next Page
Loading...
Need help?
General