INTRODUCTION / WLAN Page 11 / 77
WLAN
The setup or control of the LiveLink system via tablet and/or smart
phone app does only work in case of an existing WLAN connection
with the LiveLink control device.
In delivery condition, the LiveLink control device makes available a
WLAN of its own for a direct connection (AdHoc connection). Each
control device bears a WLAN name of its own, starting with “LIVE-
LINK”, that is printed onto the control device. The WLAN name can be
changed later, see chapter “Room setup: room name”.
Optionally, the control device can be connected to an existing network
infrastructure and utilised from there.
Selecting the WLAN with an iOS device
In the menu item “WLAN” of the device settings, all
available WLANs are listed.
Upon tapping the “LIVELINK...” WLAN, the connection
is established. The exact name (SSID) of the re-
spective WLAN is located on the control device. The
WLAN password is “livelink”.
Selecting the WLAN with an Android device
In the menu item “WLAN” of the device settings, all
available WLANs are listed.
U
pon tapping the “LIVELINK...” WLAN, the connec-
tion is established. The WLAN password is “livelink”.
CONNECT TO WLAN
To Next Page
Loading...
Need help?
General