Introduction 3
Basic functions 3
Safety instructions 3
App download 3
System overview 4
Controller 5
Push-button coupler 6
Sensors 7
· Technical Data 8
· Sensor placement 10
WLAN 11
· Connect to WLAN 11
· Utilising the WLAN with the infrastructure 12
· WLAN security 12
Access data 13
Behaviour of light control 14
· Behaviour in delivery condition 14
· Behaviour in operation 14
“LiveLink Install” app 19
Overview 19
What is a Use Case? 20
· Public Use Cases 20
· Private Use Cases 26
· Universal Use Case 26
Use Case administration 27
· Administrating public Use Cases 28
· Administrating private Use Cases 29
Room administration 30
· Room setup 31
· Room setup: Use Case 33
· Room setup: Assignment 37
· Room setup: Assigning push-buttons 44
· Concluding the room setup 48
· Room setup: Option “Rename room” 49
· Room setup: Option “Administrate scenes” 51
· Room setup: Option “Setting up scenes” 54
· Room administration 59
· Settings 60
· Settings: DALI fade time 61
· Settings: Reset LiveLink and hardware reset 61
· Settings: Advanced sensor settings 62
· Settings: Update firmware 64
· Settings: Change passwords 65
· WLAN: Connect to infrastructure 66
Operating the light control 69
“LiveLink Control” app 70
Overview 70
Select room 71
Manual setting of the room illumination 72
Activation of illumination scenarios 73
FAQ 74
Page 2 / 77
CONTENTS
To Next Page
Loading...
Need help?
General