“LIVELINK INSTALL” APP / ROOM ADMINISTRATION / CONCLUDING THE ROOM SETUP Page 48 / 77
CONCLUDING THE ROOM SETUP
Upon conclusion, a user password is specified, and after a summary has been
checked, the room setup is concluded.
1.
Specify user password
Specify user password
Subsequent to the completion of the push-button
assignment, a password for user access is specified.
The password serves for light control by the end
user via the “LiveLink Control” app.
Caution: Memorise the password!
Check the summary and apply optional settings
In this view, the room setup can be checked based
on a summary.
If changes are necessary, it is possible to jump back to
the preceding steps via the navigation in the title bar.
If now changes are necessary, the room setup is
concluded.
Applying option settings
The optional settings steps “Setting up scenes” and
“Rename room” can be carried out at this point.
These steps are described in the following chapters.
To Next Page
Loading...
Need help?
General