“LIVELINK INSTALL” APP / ROOM ADMINISTRATION / ROOM SETUP: ASSIGNING PUSH-BUTTONS Page 47 / 77
Assigning push-buttons
After the scene or luminaire group has been stored,
a window signals that LiveLink is now waiting for
the assignment of the push-button.
Now, the respective push-button must be pushed
and held (for up to 5 seconds) until the assignment
is confirmed in the window.
Additional push-button assignments and overwrit-
ing of assignments
The push-button assignment is concluded and is
listed in the list.
Now, additional push-button assignments can be
added. But not all push-buttons and light scenes
need to be linked.
If a selected push-button has already been assigned,
a note is being displayed. At this point, there is the
option to overwrite the existing assignment of this
push-button.
To Next Page
Loading...
Need help?
General