i 1
IN
U, '
NI^!I `_
ELECTRICAL SYSTEM 16
Installation
1.
Refit the bulb to the bulb holder.
2.
Refit the bulb holders to the light and turn
clockwise to lock into place.
3.
Reconnect the ba
tt
e
ry,
positive (red) lead first.
4.
Refit the seat(s)
INDICATOR
The lens on each indicator light is held in place by a
securing screw located in the body of the light.
<«rrr^^^rr^
1.
Lens
2.
Lens Retaining Screw
Removal
1.
Release the screw securing the lens to the light
body.
2.
Remove the lens.
3.
Release the bulb
Replacement
1.
Refit the bulb.
2.
Locate the lens to the light body.
3.
Refit the lens retaining screw.
16.19
To Next Page