Safety
1 4 7 10
2 5 8 11
3 6 9
2.6 Safety devices
Warning
Danger from laser beam.
Personal injury and damage to property may occur if the safety devices and protection devices are not
fully functional.
– Do not remove, modify or deactivate the interlock safety switches or protective covers on the
machine. Safety and protection devices must be fully functional at all times.
– In case of assumed or presumed damage of safety devices, disconnect the machine from the mains.
– Damaged safety and protection devices need to be replaced by a Trotec technician immediately.
2.7 Technical protective measures
2.7.1 Main switch
Pressing the main switch on the backside of the machine to disconnect the machine from the mains power supply.
20