Maintenance
8.3.2 Optics in general
Trotec Laser GmbH recommends to use the cleaning set enclosed. Alternatively, use high-quality cotton swabs together
with the provided cleaning liquid.
Notice
The following cleaning products are available as accessory parts:
– Lens cleaning cloth
– Lens cleaning liquid
8.3.3 Lens
1. Remove the air assist
hose.
2. Now remove the lens and
check the surface. Here:
2.0 inch lensRemove
loose particles and
dust with a bellows or
compressed air (ISO
8573:2010 Class 1).
3. Remove the lens and
rinse it with cleaning
fluid. Apply some lens
cleaning fluid to the lens
and let it soak in for 1
minute.
4. Clean the lens carefully
and without pressure
with the lens cleaning
cloth.
5. Put the tube back on the
laser head.
6. Insert lens.
64
To Next Page
Loading...
Need help?
General
