Need help?Do you have a question about the Trox FKRS-EU and is the answer not in the manual?
Specifies the necessary qualifications for personnel performing work on the fire damper.
Details installation in solid walls, including performance classes and locations.
Outlines installation in solid ceiling slabs with associated performance classes.
Covers installation in lightweight partition walls and their performance classifications.
Details installation requirements for fire walls and their performance classes.
Explains installation in shaft walls, including performance classifications.
Provides safety precautions related to sharp edges and thin sheet metal parts during installation.
Details performance class, wall material, distances, and opening for WA frame installation.
Outlines requirements for dry mortarless installation with ER block in solid ceiling slabs.
Details requirements for mortar-based installation into concrete bases, including performance class.
Details requirements for lightweight partition walls with metal structure and cladding on both sides.
Specifies requirements for dry mortarless installation with fire batt in lightweight walls.
Table of performance classes and installation details for dry mortarless fire batt installation.
Lists requirements for dry mortarless installation using the GL kit in lightweight walls.
Details requirements for fire walls, including classification and dimensions.
Lists requirements for dry mortarless installation using the TQ kit in fire walls.
Details requirements for shaft walls with metal structure and cladding on one side.
Details requirements for mortar-based installation in shaft walls, including performance class.
Lists requirements for dry mortarless installation using the EQ block in shaft walls.
Step-by-step instructions for closing the damper blade using the release mechanism.
Step-by-step instructions for opening the damper blade using the release mechanism.
Instructions for testing the closing and opening of the damper blade with the spring return actuator.
Explains how to test the fire damper using an automatic control unit for functions and timings.
Safety precautions for electrical hazards and preventing inadvertent actuation during maintenance.
To Next Page
General