EziWeigh5i, EziWeigh6i, EziWeigh7i, WOW2, DAS WOW2
Issue 2, 7/2017 19
Checking the power connection
Connect the power adaptor and check that the battery-charging symbol on the LCD is cycling during
charging. When the battery is fully charged, the battery-charging symbol will stop cycling, but may
restart periodically to apply a top-up charge.
Checking the USB connection (EziWeigh6i, EziWeigh7i, WOW2 and DAS WOW2 only)
Run Data Link (supplied with the indicator, or available for downloading from the Tru-Test Livestock
website www.livestock.tru-test.com).
Communication with Data Link indicates that the USB interface is functioning correctly.
Checking the RS232 serial connection (EziWeigh6i, EziWeigh7i, WOW2 and DAS WOW2 only)
Check that the indicator receives EIDs from a known good EID reader with serial connection.
Checking the Bluetooth
®
wireless connection (EziWeigh7i, WOW2 and DAS WOW2 only)
1 Establish a Bluetooth wireless connection between the indicator and a known good EID Reader
with Bluetooth wireless connectivity (see the EziWeigh7i or WOW2 Quickstart Guide for details).
2 Check that the Bluetooth wireless connection status indicator is displayed on the Weight screen.
When the indicator is connected to a device via Bluetooth wireless connection, a small triangle is
displayed on the top right-hand corner of the indicator’s LCD (►):
3 Check that the indicator receives EIDs from the EID Reader.
Checking the LCDs
Try various functions to check that the LCDs are operating correctly. Watch for missing or faded
segments, rows or columns of dots.
To test the backlight operation (EziWeigh5i):
Press
repeatedly to scroll through the backlight levels.
To test the backlight operation (EziWeigh6i, EziWeigh7i, WOW2 or DAS WOW2):
1 Press
.
2 Press repeatedly to display Setups.
3 Press
.
4 Press repeatedly to display Backlight.
5 Press repeatedly to scroll through the backlight levels.
Testing the keypad
Test the keypad in the order specified below. Every key on the keypad should produce a display
response (EziWeigh6i, EziWeigh7i, WOW2 and DAS WOW2 also produce an audible beep).
To Next Page
Loading...
Need help?
General
