TSC TE210 Series Service Manual

29
TE200/TE210/TE300/TE310 Series
Bar Code Printer Service Manual
6. Reassemble the parts in the reverse
procedures.
3.11 Replacing the Print Head Open Sensor Assembly
1. Please refer to the section 3.1 to
remove the print engine.
2. Disconnect the three screws to
remove the right side lower cover.
3. Remove the print head open sensor
by disengage the screw and cable
(black) as indicated.
Screws

TSC TE210 Series Specifications

General

Resolution	203 DPI
Print Speed	6 IPS
Print Method	Thermal transfer / Direct thermal
Processor	32-bit RISC CPU
Interface	USB 2.0, RS-232, Ethernet
Scan Rate	N/A (Barcode printer, not a barcode reader)
Barcode Resolution	N/A (Barcode printer, not a barcode reader)
Supported Barcodes	Code 39, Code 128, UPC-A, UPC-E, EAN-13, EAN-8, Interleaved 2 of 5, Codabar, POSTNET
Operating Temperature	41°F to 104°F (5°C to 40°C)
Storage Temperature	-40 ~ 60°C (-40 ~ 140°F)
Humidity	25 ~ 85% non-condensing (Operating)
Power Consumption	100-240V AC, 50/60Hz