Why is the left side printout position incorrect on my TSC Printer?
If the left side printout position is incorrect on your TSC Printer: * Set the correct label size. * Fine-tune the Shift X parameter by pressing [MENU] [SELECT] x 3 [DOWN] x 5 [SELECT].
What to do if my TSC TTP-368MT Printer is not printing?
If your TSC Printer isn't printing, there are several potential solutions: * Ensure the interface cable is securely connected, or try a new cable. * If using a wireless or Bluetooth connection, reset the wireless device settings. * Verify that the correct printer port is selected in the Windows driver. * Clean the printhead. * Ensure the printhead's harness connector is properly connected. * Check your program for a PRINT command at the end of the file and CRLF at the end of each command line.
Why is my TSC TTP-368MT Printer printing a gray line on blank labels?
If your TSC Printer is printing a gray line on blank labels, clean the print head and the platen roller.
How do I stop my TSC TTP-368MT Printer from skewing labels?
To stabilize label feeding and prevent skewing on your TSC Printer: * If the label is moving to the right, move the label guide to the left. * If the label is moving to the left, move the label guide to the right.
Why is the printing position incorrect on small labels with my TSC TTP-368MT Printer?
If the printing position is incorrect for small labels on your TSC Printer: * Recalibrate the sensor sensitivity. * Set the correct label size and gap size. * Fine-tune the Shift Y parameter by pressing [MENU] [SELECT] x3 [DOWN]x6 [SELECT]. * If using BarTender software, set the vertical offset in the driver.
Why is my TSC TTP-368MT cutting off print on the sides of the label?
If your TSC Printer is missing printing on the left or right side of the label, ensure the correct label size is set.
What to do if my TSC TTP-368MT Printer shows 'No Ribbon'?
If your TSC Printer displays a 'No Ribbon' message: * Supply a new ribbon roll. * Reinstall the ribbon according to the user's manual.
Why does my TSC Printer skip labels when printing?
If your TSC Printer is skipping labels, try these solutions: * Check if the label size is set up correctly. * Calibrate the sensor using Auto Gap or Manual Gap options. * Clear any dust from the GAP/Black mark sensor using a blower.
What to do if my TSC TTP-368MT says 'No Paper'?
If your TSC Printer indicates 'No Paper', consider these solutions: * Supply a new label roll. * Reinstall the label roll, referring to the user manual for guidance. * Calibrate the gap/black mark sensor.
How to fix poor print quality on my TSC Printer?
To resolve poor print quality on your TSC Printer: * Reload the ribbon and media. * Clean the print head and platen roller. * Adjust the print density and print speed. * Run a printer self-test to check the print head test pattern for missing dots. * Change to a proper ribbon or label media. * Adjust the printhead pressure adjustment knob.
General| Print Technology | Thermal Transfer |
|---|---|
| Print Resolution | 203 dpi |
| Media Thickness | 0.06 mm (0.00236") ~ 0.28 mm (0.011") |
| Media Core Diameter | 25.4 mm (1") ~ 76.2 mm (3") |
| Interface | USB, Ethernet |
| Operating Temperature | 5 ~ 40°C (41 ~ 104°F) |
| Operating Humidity | 25 ~ 85% non-condensing |
| Certifications | CE, FCC |
| Label Thickness | 0.06 - 0.25 mm |
| Operating System Compatibility | Windows |
To Next Page
