TSC TX200 Series - 2.3 Operator Control; 2.3.1 LED Indication and Key

TX200/ TX300/ TX600
Bar Code Printer Service Manual
15
3. MECHANISM
3.1 Replacing the Lower Cover
1. Open the printer’s top cover
by pulling the top cover open
levers located on each side of
the printer and lifting the top
cover to the maximum open
angle.
2. Remove two screws on the
lower inner cover.
3. Turn the printer upside down to
remove six screws.
4. Remove/Replace the lower
cover.
5. Reassemble the parts in the
reverse procedure.