TSC TX200 Series - Media Specifications

- 6 -
1.6 Media Specifications
Media Specifications
200 dpi
model
300 dpi
model
600 dpi
model
Media roll capacity
Max. 5” OD
Media core diameter
1” & 1.5” ID core
Media type
Continuous, die-cut, black mark, external fan-fold, notch
Media wound type
Outside wound/ Inside wound
For inside wound media, the max. label length is 6” with 3” paper core.
Media width
19 mm ~ 112 mm
Media thickness
0.055 mm ~ 0.254 mm
Label length
3 ~ 25,400 mm
(0.1“ ~ 1,000“)
3 ~ 11,430 mm
(0.1“ ~ 450“)
3 ~ 25,400 mm
(0.1“ ~ 1,000“)
Label length (peeler mode)
25.4 mm ~ 152.4 mm (1” ~ 6”)
Label length (cutter mode)
25.4 ~ max. print length
Black mark
Min. 8 mm (W) x 2 mm (H)
Gap height
Min. 2 mm