TSC TX200 Series - Operator Control; LED Indication and Key

- 11 -
2.3 Operator Control
2.3.1 LED Indication and Key
LED
Status
Indication
LED
Status
Indication
On
Other errors
On
Printer is ready
Blinking
Pause
On
Out of paper
On
Erasing memory
Blinking
Paper jam
Blinking
Downloading file
On
Out of ribbon
Blinking
Need to clear print head
Blinking
Ribbon near end
On
Print head open
Blinking
RF communication
(1) Feed labels
When the printer is ready, press the button to feed one label to the beginning of next label.
(2) Pause the printing job
When the printer is printing, press the button to pause a print job. When the printer is paused the power LED
will blink green. Press the button again to continue the printing job.