TSI Instruments Q-Trak XP - Installing and Connecting to Available Wi-Fi; Connecting to a Computer and Installing Trakpro Ultra Software

Operation and Service Manual 13
Installing and Connecting to Available Wi-Fi
®
(optional Wi-Fi
®
dongle
To connect your device to
a Wi-Fi
®
network, proceed
as follows:
1. Install the dongle into the
USB port located inside
the battery compartment.
Connecting to a Computer and Installing
TrakPro™ Ultra Software
To connect the Q-Trak™ XP
monitor to a computer for
downloading data files or
when using the TrakPro™
Ultra Software application:
1. Connect the USB-C
cable provided with the
Q-Trak™ XP monitor to
a computer.
2. From a computer, navigate to www.tsi.com/7585 and select the
TrakPro™ Ultra application exe.
3. Download and install the application.
4. Launch the TrakPro™ Ultra application.