Settings include Logging
Mode, Sample Interval, Test
Duration, and other items such
as Select Logging Schedule.
Logging Mode
There are three logging modes:
• Manual Save
• Continuous Save
• Scheduled Save
Manual Save logging mode
averages measurements
collected during the sample
interval and records the
average value in the log file.
Once the sample is complete
the application prompts you to
either select START or DONE.
Select START to take another
sample or DONE to end the
logging session.
Selecting the View Before Save toggle button to ON, Manual Save
prompts you to either SAVE or DISCARD once the sample is
complete. Swipe up or down to view the collected data then select
SAVE or DISCARD to save or discard the data. After selecting
SAVE or DISCARD the page will display START or DONE. Select
START to take another sample or DONE to end the logging session.
Continuous Save logging mode averages measurements collected
during the sample interval and records the average value in the log
file. Unlike Manual Save mode, Continuous Save mode continues
logging data until the Time Duration time has elapsed. In this mode,
the sample data is automatically saved to memory at the end of the
sampling interval and you are not given the option to view the data
before saving.
To Next Page
Loading...
